Manila Command Line Interface (CLI)
Manila Service Verification
In this section, we use the Manila CLI to verify that the configuration
presented in the section called “Sample manila.conf” has been
properly initialized by Manila.
$ manila service-list
+----+------------------+-------------------------------+------+---------+-------+----------------------------+
| Id | Binary | Host | Zone | Status | State | Updated_at |
+----+------------------+-------------------------------+------+---------+-------+----------------------------+
| 1 | manila-scheduler | ostk-controller | nova | enabled | up | 2017-09-01T12:25:12.000000 |
| 2 | manila-share | ostk-controller@cdotSingleSVM | nova | enabled | up | 2017-09-01T12:25:15.000000 |
| 2 | manila-share | ostk-controller@cdoMultiSVM | nova | enabled | up | 2017-09-01T12:25:15.000000 |
+----+------------------+-------------------------------+------+---------+-------+----------------------------+
Creating and Defining Manila Share Types
In this section, we create a variety of Manila Share Types that leverage
both the default capabilities of each driver, as well as the NetApp
specific extra specs described in
Table 6.10, “NetApp supported Extra Specs for use with Manila Share Types”.
- The
general type provisions Manila shares onto the cDOT backend
using all the default settings, including snapshot support.
- The
flash type provisions Manila shares onto any pool that
contains only SSD disks within the aggregate.
- The
archive type provisions Manila shares onto any pool that
contains SAS drives within the aggregate, and also creates thin
provisioned FlexVol volumes.
- The
shared type provisions Manila a new SVM for each share
network object. Snapshot support is enabled.
- The
default type provisions Manila shares onto any pool of any
driver without share server management and snapshot support.
$ manila type-create general False
+--------------------------------------+---------+------------+------------+--------------------------------------+
| ID | Name | Visibility | is_default | required_extra_specs |
+--------------------------------------+---------+------------+------------+--------------------------------------+
| deadeebf-19a2-47b1-9d7f-1c3806cfcb72 | general | public | - | driver_handles_share_servers : False |
+--------------------------------------+---------+------------+------------+--------------------------------------+
$ manila type-create flash False
+--------------------------------------+---------+------------+------------+--------------------------------------+
| ID | Name | Visibility | is_default | required_extra_specs |
+--------------------------------------+---------+------------+------------+--------------------------------------+
| 37fb9f7e-4ffe-4900-8dba-c6d4251e588f | flash | public | - | driver_handles_share_servers : False |
+--------------------------------------+---------+------------+------------+--------------------------------------+
$ manila type-create archive False
+--------------------------------------+---------+------------+------------+--------------------------------------+
| ID | Name | Visibility | is_default | required_extra_specs |
+--------------------------------------+---------+------------+------------+--------------------------------------+
| 20e4b58d-aab6-42ae-8e9b-8f9d44f17276 | archive | public | - | driver_handles_share_servers : False |
+--------------------------------------+---------+------------+------------+--------------------------------------+
$ manila type-create --snapshot_support True shared True
+--------------------------------------+---------+------------+------------+--------------------------------------+
| ID | Name | Visibility | is_default | required_extra_specs |
+--------------------------------------+---------+------------+------------+--------------------------------------+
| db589d3e-09e9-49a2-a5be-05471d178eaa | shared | public | - | driver_handles_share_servers : True |
+--------------------------------------+---------+------------+------------+--------------------------------------+
Important
In the Mitaka and Newton release of OpenStack, snapshot support is
enabled by default for a newly created share type. Starting with the
Ocata release, the snapshot_support extra spec must be set to
True in order to allow snapshots for a share type. If the
snapshot_support extra_spec is omitted or if it is set to False,
users would not be able to create snapshots on shares of this share
type.
Other snapshot-related extra specs in the Ocata release (and later)
include:
create_share_from_snapshot_support: Allow the creation of a
new share from a snapshotrevert_to_snapshot_support: Allow a share to be reverted to
the most recent snapshot
If an extra-spec is left unset, it will default to ‘False’, but a
newly created share may or may not end up on a backend with the
associated capability. Set the extra spec explicitly to False,
if you would like your shares to be created only on backends that do
not support the associated capabilities. For a table of NetApp
supported extra specs, refer to
Table 6.10, “NetApp supported Extra Specs for use with Manila Share Types”.
$ manila type-key general set share_backend_name=cdotSingleSVM
$ manila type-key general set snapshot_support=True
$ manila type-key general set revert_to_snapshot_support=True
$ manila type-key general set create_share_from_snapshot_support=True
$ manila type-key default set snapshot_support=False
$ manila type-key flash set netapp_disk_type=SSD
$ manila type-key flash set netapp_hybrid_aggregate="<is> False"
$ manila type-key archive set thin_provisioning="<is> True" netapp_disk_type=SAS
$ manila type-key shared set snapshot_support=True
$ manila extra-specs-list
+--------------------------------------+---------+--------------------------------------------+
| ID | Name | all_extra_specs |
+--------------------------------------+---------+--------------------------------------------+
| 20e4b58d-aab6-42ae-8e9b-8f9d44f17276 | archive | driver_handles_share_servers : False |
| | | netapp_disk_type : SAS |
| | | thin_provisioning : <is> True |
| 37fb9f7e-4ffe-4900-8dba-c6d4251e588f | flash | netapp_disk_type : SSD |
| | | netapp_hybrid_aggregate : <is> False |
| | | driver_handles_share_servers : False |
| 447732be-4cf2-42b0-83dc-4b6f4ed5368d | default | driver_handles_share_servers : False |
| | | snapshot_support : False |
| deadeebf-19a2-47b1-9d7f-1c3806cfcb72 | general | share_backend_name : cdotSingleSVM |
| | | driver_handles_share_servers : False |
| | | snapshot_support : True |
| | | revert_to_snapshot_support : True |
| | | create_share_from_snapshot_support : True |
| db589d3e-09e9-49a2-a5be-05471d178eaa | shared | snapshot_support : True |
| | | driver_handles_share_servers : True |
+--------------------------------------+---------+--------------------------------------------+
Creating Manila Share Network Objects
In this section, we create two manila share network objects, doing so
to demonstrate that share-network-objects are used only with share servers.
Network Plugin: NeutronNetworkPlugin
In this scenario the configurable Neutron Network Plugin is in use.
As such each share network object is free to us any appropriate
neutron network. In this particular case, we are using a provider
network.
$ cat /etc/manila/manila.conf
...
network_api_class = manila.network.neutron.neutron_network_plugin.NeutronNetworkPlugin
...
$ neutron net-list
+--------------------------------------+------------------+-----------------------------------------------------+
| id | name | subnets |
+--------------------------------------+------------------+-----------------------------------------------------+
...
| 0ba4ac4a-1408-4fa6-84d6-fd6db8113382 | storage-provider | 1f9ec07c-085a-437d-82f0-7390d706758b 192.168.0.0/16 |
...
+--------------------------------------+------------------+-----------------------------------------------------+
$ manila share-network-create --neutron-subnet-id 1f9ec07c-085a-437d-82f0-7390d706758b \
--neutron-net-id 0ba4ac4a-1408-4fa6-84d6-fd6db8113382 \
--name storage-provider-network
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| network_type | None |
| name | storage-provider-network |
| segmentation_id | None |
| created_at | 2017-09-01T10:16:16.999826 |
| neutron_subnet_id | 1f9ec07c-085a-437d-82f0-7390d706758b |
| updated_at | None |
| mtu | None |
| gateway | None |
| neutron_net_id | 0ba4ac4a-1408-4fa6-84d6-fd6db8113382 |
| ip_version | None |
| nova_net_id | None |
| cidr | None |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| id | 557243e9-aad6-4b63-8d86-70239ecf4993 |
| description | None |
+-------------------+--------------------------------------+
$ manila share-network-list
+--------------------------------------+--------------------------+
| id | name |
+--------------------------------------+--------------------------+
| 557243e9-aad6-4b63-8d86-70239ecf4993 | storage-provider-network |
+--------------------------------------+--------------------------+
$ manila share-network-show storage-provider-network
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| network_type | flat |
| name | storage-provider-network |
| segmentation_id | None |
| created_at | 2017-09-01T10:16:16.000000 |
| neutron_subnet_id | 1f9ec07c-085a-437d-82f0-7390d706758b |
| updated_at | 2017-09-01T10:19:25.000000 |
| mtu | 1500 |
| gateway | None |
| neutron_net_id | 0ba4ac4a-1408-4fa6-84d6-fd6db8113382 |
| ip_version | 4 |
| nova_net_id | None |
| cidr | 192.168.0.0/16 |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| id | 557243e9-aad6-4b63-8d86-70239ecf4993 |
| description | None |
+-------------------+--------------------------------------+
Network Plugin: NeutronSingleNetworkPlugin
In this scenario the simple Neutron Network Plugin is in use.
As such each share network will use the Neutron Network and
Neutron Subnet configured in the /etc/manila/manila.conf.
$ cat /etc/manila/manila.conf
...
network_api_class = manila.network.neutron.neutron_network_plugin.NeutronSingleNetworkPlugin
neutron_net_id = 0ba4ac4a-1408-4fa6-84d6-fd6db8113382
neutron_subnet_id = 1f9ec07c-085a-437d-82f0-7390d706758b
...
$ manila share-network-create --name storage-provider-network-2
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| network_type | None |
| name | storage-provider-network-2 |
| segmentation_id | None |
| created_at | 2017-09-01T10:50:55.000000 |
| neutron_subnet_id | None |
| updated_at | None |
| mtu | None |
| gateway | None |
| neutron_net_id | None |
| ip_version | None |
| nova_net_id | None |
| cidr | None |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| id | e6a05868-fdfd-4da9-a914-6beab07b3121 |
| description | None |
+-------------------+--------------------------------------+
$ manila share-network-list
+--------------------------------------+----------------------------+
| id | name |
+--------------------------------------+----------------------------+
| 557243e9-aad6-4b63-8d86-70239ecf4993 | storage-provider-network |
| e6a05868-fdfd-4da9-a914-6beab07b3121 | storage-provider-network-2 |
+--------------------------------------+----------------------------+
$ manila share-network-show storage-provider-network-2
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| network_type | flat |
| name | storage-provider-network-2 |
| segmentation_id | None |
| created_at | 2017-09-01T10:50:55.000000 |
| neutron_subnet_id | 1f9ec07c-085a-437d-82f0-7390d706758b |
| updated_at | 2017-09-01T10:52:29.000000 |
| mtu | 1500 |
| gateway | None |
| neutron_net_id | 0ba4ac4a-1408-4fa6-84d6-fd6db8113382 |
| ip_version | 4 |
| nova_net_id | None |
| cidr | 192.168.0.0/16 |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| id | e6a05868-fdfd-4da9-a914-6beab07b3121 |
| description | None |
+-------------------+--------------------------------------+
Creating Manila Shares with Share Types
Without Share Server Management
In this section, we create shares with the default type, as well as
all but the shared share type.
$ manila create --name myDefault NFS 1
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | creating |
| description | None |
| availability_zone | nova |
| share_network_id | None |
| share_server_id | None |
| host | None |
| snapshot_id | None |
| is_public | False |
| snapshot_support | False |
| id | 63bd5bef-298d-4e49-bea0-49a4cfb143f9 |
| size | 1 |
| name | myDefault |
| share_type | 447732be-4cf2-42b0-83dc-4b6f4ed5368d |
| created_at | 2017-09-01T12:44:11.794842 |
| share_proto | NFS |
| project_id | 5bf3e15106dd4333b1f55742fa08f90e |
| metadata | {} |
+-------------------+--------------------------------------+
$ manila create --name myGeneral --share-type general NFS 1
+-------------------+--------------------------------------------------------+
| Property | Value |
+-------------------+--------------------------------------------------------+
| status | creating |
| description | None |
| availability_zone | nova |
| share_network_id | None |
| share_server_id | None |
| host | None |
| snapshot_id | None |
| is_public | False |
| snapshot_support | True |
| revert_to_snapshot_support | True |
| create_share_from_snapshot_support | True |
| id | 95f49ca6-723f-42d0-92f3-4be79c9ad7e6 |
| size | 1 |
| name | myGeneral |
| share_type | deadeebf-19a2-47b1-9d7f-1c3806cfcb72 |
| created_at | 2017-09-01T12:44:47.223548 |
| share_proto | NFS |
| project_id | 5bf3e15106dd4333b1f55742fa08f90e |
| metadata | {} |
+-------------------+--------------------------------------------------------+
$ manila create --name myFlash --share-type flash NFS 1
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | creating |
| description | None |
| availability_zone | nova |
| share_network_id | None |
| share_server_id | None |
| host | None |
| snapshot_id | None |
| is_public | False |
| id | ec5d2ddb-4573-4ee1-a1e8-2c8532c68e3d |
| size | 1 |
| name | myFlash |
| share_type | 37fb9f7e-4ffe-4900-8dba-c6d4251e588f |
| created_at | 2017-09-01T12:44:59.374780 |
| share_proto | NFS |
| project_id | 5bf3e15106dd4333b1f55742fa08f90e |
| metadata | {} |
+-------------------+--------------------------------------+
$ manila create --name myArchive --share-type archive NFS 1
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | creating |
| description | None |
| availability_zone | nova |
| share_network_id | None |
| share_server_id | None |
| host | None |
| snapshot_id | None |
| is_public | False |
| id | e4774a70-3e70-4a7c-ab76-886f010efe0a |
| size | 1 |
| name | myArchive |
| share_type | 20e4b58d-aab6-42ae-8e9b-8f9d44f17276 |
| created_at | 2017-09-01T12:45:11.124722 |
| share_proto | NFS |
| project_id | 5bf3e15106dd4333b1f55742fa08f90e |
| metadata | {} |
+-------------------+--------------------------------------+
$ manila list
+-------------------------------------+----------+----+------------+----------+-----------+-----------------+------------------------------------+------------------+
| ID | Name |Size| Share Proto| Status | Is Public | Share Type Name | Host | Availability Zone|
+-------------------------------------+----------+----+------------+----------+-----------+-----------------+------------------------------------+------------------+
| 63bd5bef-298d-4e49-bea0-49a4cfb143f9| myDefault| 1 | NFS | available| False | default | scspr0030615001@cdotSingleSVM#aggr1| nova |
| 95f49ca6-723f-42d0-92f3-4be79c9ad7e6| myGeneral| 1 | NFS | available| False | general | scspr0030615001@cdotSingleSVM#aggr1| nova |
| e4774a70-3e70-4a7c-ab76-886f010efe0a| myArchive| 1 | NFS | available| False | archive | scspr0030615001@cdotSingleSVM#aggr1| nova |
| ec5d2ddb-4573-4ee1-a1e8-2c8532c68e3d| myFlash | 1 | NFS | error | False | flash | None | nova |
+-------------------------------------+----------+----+------------+----------+-----------+-----------------+------------------------------------+------------------+
With Share Server Management
In this section we create three shares, two on the share network object built upon
the Simple Neutron Network Plugin and one built upon the Configurable Neutron
Network Plugin.
$ manila create --share-network storage-provider-network --share-type shared --name shared1 NFS 1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | creating |
| share_type_name | shared |
| description | None |
| availability_zone | None |
| share_network_id | 557243e9-aad6-4b63-8d86-70239ecf4993 |
| host | |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | df8e63b1-3bb1-4c28-aad7-b29a80ac3e04 |
| size | 1 |
| user_id | 0c96b73302674429918df682c7d20f22 |
| name | shared1 |
| share_type | db589d3e-09e9-49a2-a5be-05471d178eaa |
| has_replicas | False |
| replication_type | None |
| created_at | 2017-09-01T11:20:21.000000 |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| metadata | {} |
+-----------------------------+--------------------------------------+
$ manila create --share-network storage-provider-network-2 --share-type shared --name shared2 NFS 1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | creating |
| share_type_name | shared |
| description | None |
| availability_zone | None |
| share_network_id | e6a05868-fdfd-4da9-a914-6beab07b3121 |
| host | |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 4f54f4e8-80f1-4b21-9fda-c0882f7837aa |
| size | 1 |
| user_id | 0c96b73302674429918df682c7d20f22 |
| name | shared2 |
| share_type | db589d3e-09e9-49a2-a5be-05471d178eaa |
| has_replicas | False |
| replication_type | None |
| created_at | 2017-09-01T11:21:55.000000 |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| metadata | {} |
+-----------------------------+--------------------------------------+
$ manila create --share-network storage-provider-network-2 --share-type shared --name shared3 NFS 1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | creating |
| share_type_name | shared |
| description | None |
| availability_zone | None |
| share_network_id | e6a05868-fdfd-4da9-a914-6beab07b3121 |
| host | |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 9c05879a-a063-487b-bed4-5c039d26e26a |
| size | 1 |
| user_id | 0c96b73302674429918df682c7d20f22 |
| name | shared3 |
| share_type | db589d3e-09e9-49a2-a5be-05471d178eaa |
| has_replicas | False |
| replication_type | None |
| created_at | 2017-09-01T11:28:15.000000 |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| metadata | {} |
+-----------------------------+--------------------------------------+
$ manila list
+-------------------------------------+--------+------+------------+-----------+-----------+-----------------+-----------------------------------+------------------+
| ID | Name | Size | Share Proto| Status | Is Public | Share Type Name | Host | Availability Zone|
+-------------------------------------+--------+------+------------+-----------+-----------+-----------------+-----------------------------------+------------------+
| 4f54f4e8-80f1-4b21-9fda-c0882f7837aa| shared2| 1 | NFS | available | False | shared | scspr0030615001@cdotMultiSVM#aggr1| nova |
| 9c05879a-a063-487b-bed4-5c039d26e26a| shared3| 1 | NFS | available | False | shared | scspr0030615001@cdotMultiSVM#aggr1| nova |
| df8e63b1-3bb1-4c28-aad7-b29a80ac3e04| shared1| 1 | NFS | available | False | shared | scspr0030615001@cdotMultiSVM#aggr1| nova |
+-------------------------------------+--------+------+------------+-----------+-----------+-----------------+-----------------------------------+------------------+
Viewing Share Servers
Shares created against any one share network are placed on the same SVM.
Notice that there are two share-servers for the three shares.
Note
Admin privileges are required to see or delete share-servers.
Notice the vserver names in the manila share-server-show command
$ manila share-server-list
+--------------------------------------+-----------------------+--------+----------------------------+----------------------------------+----------------------------+
| Id | Host | Status | Share Network | Project Id | Updated_at |
+--------------------------------------+-----------------------+--------+----------------------------+----------------------------------+----------------------------+
| c6f2fcbb-8c35-4a42-8f0a-e8ac81605d88 | chadcloud1@cdot_multi | active | storage-provider-network | 37ceaca2938c409d8a6172f2da2ba788 | 2017-09-01T10:19:34.000000 |
| c3c6bbfb-c71d-416d-84f3-600575746a36 | chadcloud1@cdot_multi | active | storage-provider-network-2 | 37ceaca2938c409d8a6172f2da2ba788 | 2017-09-01T10:52:32.000000 |
+--------------------------------------+-----------------------+--------+----------------------------+----------------------------------+----------------------------+
$ manila share-server-show c6f2fcbb-8c35-4a42-8f0a-e8ac81605d88
+----------------------+-------------------------------------------------+
| Property | Value |
+----------------------+-------------------------------------------------+
| status | active |
| created_at | 2017-09-01T10:19:24.000000 |
| updated_at | 2017-09-01T10:19:34.000000 |
| share_network_name | storage-provider-network |
| host | scspr0030615001@cdotMultiSVM |
| share_network_id | 557243e9-aad6-4b63-8d86-70239ecf4993 |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| id | c6f2fcbb-8c35-4a42-8f0a-e8ac81605d88 |
| details:vserver_name | cdot_multi_c6f2fcbb-8c35-4a42-8f0a-e8ac81605d88 |
+----------------------+-------------------------------------------------+
+----------------------+-------------------------------------------------+
$ manila share-server-show c3c6bbfb-c71d-416d-84f3-600575746a36
+----------------------+-------------------------------------------------+
| Property | Value |
+----------------------+-------------------------------------------------+
| status | active |
| created_at | 2017-09-01T10:52:28.000000 |
| updated_at | 2017-09-01T10:52:32.000000 |
| share_network_name | storage-provider-network-2 |
| host | scspr0030615001@cdotMultiSVM |
| share_network_id | e6a05868-fdfd-4da9-a914-6beab07b3121 |
| project_id | 37ceaca2938c409d8a6172f2da2ba788 |
| id | c3c6bbfb-c71d-416d-84f3-600575746a36 |
| details:vserver_name | cdot_multi_c3c6bbfb-c71d-416d-84f3-600575746a36 |
+----------------------+-------------------------------------------------+
Viewing Flexvols
We’ll now look at the CLI output from the ONTAP cluster to see what
FlexVol volumes were created for the Manila share objects, as well as
the provisioning strategy (thin or thick) for each share. Note how the
name of the FlexVol volume corresponds to the share UUID as defined by
Manila. You can see that share e4774a70_3e70_4a7c_ab76_886f010efe0a
was thin provisioned, as declared by the archive share type. The
rest of the shares were thick provisioned. Also note that the share of
type myFlash failed to create, as this SVM does not have any
aggregates with SSD drives, as seen in the command output below.
cluster-1::> volume show -vserver manila-vserver
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
manila-vserver
share_63bd5bef_298d_4e49_bea0_49a4cfb143f9
aggr1 online RW 1GB 972.7MB 5%
manila-vserver
share_95f49ca6_723f_42d0_92f3_4be79c9ad7e6
aggr1 online RW 1GB 972.7MB 5%
manila-vserver
share_e4774a70_3e70_4a7c_ab76_886f010efe0a
aggr1 online RW 1GB 972.7MB 5%
manila-vserver
vol1 aggr1 online RW 20MB 18.88MB 5%
4 entries were displayed.
cluster-1::> volume show -vserver manila-vserver -space-guarantee none
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
manila-vserver
share_e4774a70_3e70_4a7c_ab76_886f010efe0a
aggr1 online RW 1GB 972.7MB 5%
cluster-1::> volume show -vserver manila-vserver -space-guarantee volume
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
manila-vserver
share_63bd5bef_298d_4e49_bea0_49a4cfb143f9
aggr1 online RW 1GB 972.7MB 5%
manila-vserver
share_95f49ca6_723f_42d0_92f3_4be79c9ad7e6
aggr1 online RW 1GB 972.7MB 5%
manila-vserver
vol1 aggr1 online RW 20MB 18.88MB 5%
3 entries were displayed.
cluster-1::> disk show -type SSD
There are no entries matching your query.
Granting Access To Shares
We’ll now add access rules for any IP-connected client to mount these
NFS shares with full read/write privileges.
$ manila access-allow 63bd5bef-298d-4e49-bea0-49a4cfb143f9 ip 0.0.0.0/0
+--------------+--------------------------------------+
| Property | Value |
+--------------+--------------------------------------+
| share_id | 63bd5bef-298d-4e49-bea0-49a4cfb143f9 |
| deleted | False |
| created_at | 2017-09-01T13:25:24.577736 |
| updated_at | None |
| access_type | ip |
| access_to | 0.0.0.0/0 |
| access_level | rw |
| state | queued_to_apply |
| deleted_at | None |
| id | c400bdd7-7e4f-49a4-b73d-5aa417af95c3 |
+--------------+--------------------------------------+
$ manila access-allow 95f49ca6-723f-42d0-92f3-4be79c9ad7e6 ip 0.0.0.0/0
+--------------+--------------------------------------+
| Property | Value |
+--------------+--------------------------------------+
| share_id | 95f49ca6-723f-42d0-92f3-4be79c9ad7e6 |
| deleted | False |
| created_at | 2017-09-01T13:25:47.417271 |
| updated_at | None |
| access_type | ip |
| access_to | 0.0.0.0/0 |
| access_level | rw |
| state | queued_to_apply |
| deleted_at | None |
| id | 09f8f699-1cec-4519-8aaa-a30d346ad54c |
+--------------+--------------------------------------+
$ manila access-allow e4774a70-3e70-4a7c-ab76-886f010efe0a ip 0.0.0.0/0
+--------------+--------------------------------------+
| Property | Value |
+--------------+--------------------------------------+
| share_id | e4774a70-3e70-4a7c-ab76-886f010efe0a |
| deleted | False |
| created_at | 2017-09-01T13:26:03.344004 |
| updated_at | None |
| access_type | ip |
| access_to | 0.0.0.0/0 |
| access_level | rw |
| state | queued_to_apply |
| deleted_at | None |
| id | d0565115-8369-455e-ad8f-3dd7c56037ea |
+--------------+--------------------------------------+
Viewing Export Locations
We’ll now list the export location(s) for one of the new shares to see
its network path. There may be multiple export locations for a given
share, at least one of which should be listed as preferred; clients
should use the preferred path for optimum performance.
$ manila share-export-location-list 63bd5bef-298d-4e49-bea0-49a4cfb143f9 \
--columns Path,Preferred
+-------------------------------------------------------------+-----------+
| Path | Preferred |
+-------------------------------------------------------------+-----------+
| 192.168.228.110:/share_6fae2eb7_9eea_4a0f_b215_1f405dbcc4d4 | True |
+-------------------------------------------------------------+-----------+
Manila Quality of Service
Manila Administrators have the ability to create share types with throughput
limits specified for each share that users create. The following examples
demonstrate creating two share types with two different QoS specs. For all
supported specs refer to
“Table 6.11, “NetApp specific QoS Extra Specs”
$ manila type-create platinum True --extra-specs qos=True netapp:maxiopspergib=100 snapshot_support=True create_share_from_snapshot_support=True
+----------------------+-------------------------------------------+
| Property | Value |
+----------------------+-------------------------------------------+
| required_extra_specs | driver_handles_share_servers : True |
| Name | platinum |
| Visibility | public |
| is_default | - |
| ID | c6e8d62f-f827-4fc8-af94-789d370abac7 |
| optional_extra_specs | netapp:maxiopspergib : 100 |
| | qos : True |
| | create_share_from_snapshot_support : True |
| | snapshot_support : True |
+----------------------+-------------------------------------------+
$ manila type-create gold False --extra-specs qos=True netapp:maxbps=5000 snapshot_support=True create_share_from_snapshot_support=True
+----------------------+-------------------------------------------+
| Property | Value |
+----------------------+-------------------------------------------+
| required_extra_specs | driver_handles_share_servers : False |
| Name | gold |
| Visibility | public |
| is_default | - |
| ID | 96b45147-ab7c-4f85-8b8e-bdb7e849689e |
| optional_extra_specs | create_share_from_snapshot_support : True |
| | snapshot_support : True |
| | qos : True |
| | netapp:maxbps : 5000 |
+----------------------+-------------------------------------------+
$ manila create cifs 50 --share-network project-network-1 --share-type platinum --name myshare1
+---------------------------------------+--------------------------------------+
| Property | Value |
+---------------------------------------+--------------------------------------+
| status | creating |
| share_type_name | platinum |
| description | None |
| availability_zone | None |
| share_network_id | 75b18431-6832-4161-964f-e79ce693276b |
| share_server_id | None |
| share_group_id | None |
| host | |
| revert_to_snapshot_support | True |
| access_rules_status | active |
| snapshot_id | None |
| create_share_from_snapshot_support | True |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | dfae168f-ac70-42e0-9779-b1aebc98d0ce |
| size | 50 |
| source_share_group_snapshot_member_id | None |
| user_id | 75a6db01ffda4ba59637e307e6c768e0 |
| name | myshare1 |
| share_type | 2e3734eb-54fe-4e5c-a5ca-6ef9de4c3524 |
| has_replicas | False |
| replication_type | None |
| created_at | 2017-08-31T00:17:05.000000 |
| share_proto | CIFS |
| mount_snapshot_support | False |
| project_id | 4aaa76d5ab2341b6bb84a9a911c1550b |
| metadata | {} |
+---------------------------------------+--------------------------------------+
$ manila create nfs 50 --share-type gold --name myshare2
+---------------------------------------+--------------------------------------+
| Property | Value |
+---------------------------------------+--------------------------------------+
| status | creating |
| share_type_name | gold |
| description | None |
| availability_zone | None |
| share_network_id | None |
| share_server_id | None |
| share_group_id | None |
| host | |
| revert_to_snapshot_support | True |
| access_rules_status | active |
| snapshot_id | None |
| create_share_from_snapshot_support | True |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | e423a08d-efbb-4c93-8027-7f22b91946da |
| size | 50 |
| source_share_group_snapshot_member_id | None |
| user_id | 75a6db01ffda4ba59637e307e6c768e0 |
| name | myshare2 |
| share_type | 9ce01f95-122b-4a50-b582-aa8ef0cdb4f0 |
| has_replicas | False |
| replication_type | dr |
| created_at | 2017-08-31T00:17:44.000000 |
| share_proto | NFS |
| mount_snapshot_support | False |
| project_id | 4aaa76d5ab2341b6bb84a9a911c1550b |
| metadata | {} |
+---------------------------------------+--------------------------------------+
$ manila list
+--------------------------------------+----------+------+-------------+-----------+-----------+-----------------+-----------------------------------+-------------------+
| ID | Name | Size | Share Proto | Status | Is Public | Share Type Name | Host | Availability Zone |
+--------------------------------------+----------+------+-------------+-----------+-----------+-----------------+-----------------------------------+-------------------+
| dfae168f-ac70-42e0-9779-b1aebc98d0ce | myshare1 | 50 | CIFS | available | False | platinum | openstack2@cmodeMSVMNFS#aggr_2 | az_1 |
| e423a08d-efbb-4c93-8027-7f22b91946da | myshare2 | 50 | NFS | available | False | gold | openstack2@cmodeSSVMNFS_02#aggr_2 | az_2 |
+--------------------------------------+----------+------+-------------+-----------+-----------+-----------------+-----------------------------------+-------------------+
Creating a Manila CIFS share with security service
As previously noted, creation of a CIFS share requires the co-deployment
of one of three security services (LDAP, Active Directory, or Kerberos).
This section demonstrates the share network and security service setup
necessary before creating the CIFS share.
$ manila share-network-create --neutron-net-id <neutron-net-id> \
--neutron-subnet-id <neutron-subnet-id> \
--name <share_network_name>
$ manila security-service-create active_directory --dns-ip <dns_ip> \
--domain <dns_domain> \
--user <user_name>
--password <password>
--name <security_service_name>
+-------------+--------------------------------------+
| Property | Value |
+-------------+--------------------------------------+
| status | new |
| domain | stack1.netapp.com |
| password | secrete |
| name | ac10 |
| dns_ip | 10.250.XXX.XXX |
| created_at | 2015-10-15T19:02:19.309255 |
| updated_at | None |
| server | None |
| user | Administrator |
| project_id | b568323d304046d8a8abaa8e822f17e3 |
| type | active_directory |
| id | 259a203d-9e11-49cd-83d7-e5c986c01221 |
| description | None |
+-------------+--------------------------------------+
$ manila share-network-security-service-add <share_network> <security_service>
$ manila create CIFS 1 --share-network <share_network_name> --share-type general
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | None |
| share_type_name | general |
| description | None |
| availability_zone | None |
| share_network_id | None |
| share_server_id | None |
| host | None |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | 4b4e512a-a1dd-45e6-a6c2-5eed978a29f0 |
| size | 1 |
| name | None |
| share_type | deadeebf-19a2-47b1-9d7f-1c3806cfcb72 |
| created_at | 2015-10-19T15:10:30.314544 |
| share_proto | CIFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | b568323d304046d8a8abaa8e822f17e3 |
| metadata | {} |
+-----------------------------+--------------------------------------+
Importing and Exporting Manila Shares
In this section, we use the admin-only manage command to bring
storage resources under Manila management. A share is an ONTAP
FlexVol, and we must tell Manila which host, backend and pool contain
the FlexVol. It may be useful to list the Manila pools to get the
correct format. Also note that the FlexVol must be specified in the
format Manila uses to report share export locations. For NFS this format
is address:/path, where address is that of any NFS LIF where the
FlexVol is accessible and path is the junction path of the FlexVol.
For CIFS this format is \\address\name, where address is that of
any CIFS LIF where the FlexVol is accessible and name is the name of
the FlexVol.
$ manila pool-list
+-------------------------------------+---------+----------------------+--------+
| Name | Host | Backend | Pool |
+-------------------------------------+---------+----------------------+--------+
| liberty@cmode_single_svm_nfs#manila | liberty | cmode_single_svm_nfs | manila |
+-------------------------------------+---------+----------------------+--------+
$ manila manage liberty@cmode_single_svm_nfs#manila NFS 192.168.228.102:/myvol
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | manage_starting |
| description | None |
| availability_zone | None |
| share_network_id | None |
| export_locations | 192.168.228.102:/myvol |
| share_server_id | None |
| host | liberty@cmode_single_svm_nfs#manila |
| snapshot_id | None |
| is_public | False |
| snapshot_support | False |
| id | 6e42c910-67a8-47fd-885f-b03d1756675f |
| size | None |
| name | None |
| share_type | default |
| created_at | 2015-08-13T20:27:09.000000 |
| share_proto | NFS |
| project_id | 75dbed01579f4a7e8df2878de25fbc49 |
| metadata | {} |
+-------------------+--------------------------------------+
$ manila show 6e42c910-67a8-47fd-885f-b03d1756675f
+-------------------+-------------------------------------------------------------+
| Property | Value |
+-------------------+-------------------------------------------------------------+
| status | available |
| description | None |
| availability_zone | None |
| share_network_id | None |
| export_locations | 192.168.228.102:/share_6e42c910_67a8_47fd_885f_b03d1756675f |
| | 10.0.0.100:/share_6e42c910_67a8_47fd_885f_b03d1756675f |
| share_server_id | None |
| host | liberty@cmode_single_svm_nfs#manila |
| snapshot_id | None |
| is_public | False |
| snapshot_support | False |
| id | 6e42c910-67a8-47fd-885f-b03d1756675f |
| size | 1 |
| name | None |
| share_type | default |
| created_at | 2015-08-13T20:27:09.000000 |
| share_proto | NFS |
| project_id | 75dbed01579f4a7e8df2878de25fbc49 |
| metadata | {} |
+-------------------+-------------------------------------------------------------+
Important
FlexVols that are part of a SnapMirror relationship cannot be
brought under Manila’s management. SnapMirror relationships must be
removed before attempting to manage the FlexVol.
We’ll now remove a share from Manila management using the admin-only
unmanage CLI command.
$ manila unmanage 6e42c910-67a8-47fd-885f-b03d1756675f
Creating Manila Consistency Groups
In this section, we’ll create and work with consistency groups and
consistency group (CG) snapshots. First we’ll list the share types and
create a CG using one of the existing types.
$ manila type-list
+--------------------------------------+---------+------------+------------+--------------------------------------+
| ID | Name | Visibility | is_default | required_extra_specs |
+--------------------------------------+---------+------------+------------+--------------------------------------+
| 08d3b20f-3685-4f83-ba4f-efe9276e922c | zoom | public | - | driver_handles_share_servers : False |
| 30abd1a6-0f5f-426b-adb4-13e0062d3183 | default | public | YES | driver_handles_share_servers : False |
| d7f70347-7464-4297-8d8e-12fa13e64775 | nope | public | - | driver_handles_share_servers : False |
+--------------------------------------+---------+------------+------------+--------------------------------------+
$ manila cg-create --name cg_1 --description "cg_1 consistency group" --share_type "type_1"
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| status | creating |
| description | cg_1 consistency group |
| source_cgsnapshot_id | None |
| created_at | 2015-08-18T17:36:36.088532 |
| share_network_id | None |
| share_server_id | None |
| host | None |
| project_id | f55f22cc74b347f6992a9f969eeb40a1 |
| share_types | 45ff1d79-0dd7-4309-b259-652c5f9e3b41 |
| id | 9379f22c-a5c0-4455-bd25-ad373e93d7c3 |
| name | cg_1 |
+----------------------+--------------------------------------+
$ manila cg-list
+--------------------------------------+------+------------------------+-----------+
| id | name | description | status |
+--------------------------------------+------+------------------------+-----------+
| 9379f22c-a5c0-4455-bd25-ad373e93d7c3 | cg_1 | cg_1 consistency group | available |
+--------------------------------------+------+------------------------+-----------+
$ manila cg-show 9379f22c-a5c0-4455-bd25-ad373e93d7c3
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| status | available |
| description | cg_1 consistency group |
| source_cgsnapshot_id | None |
| created_at | 2015-08-18T17:36:36.000000 |
| share_network_id | None |
| share_server_id | None |
| host | ubuntu@cmode_single_svm_nfs#aggr1 |
| project_id | f55f22cc74b347f6992a9f969eeb40a1 |
| share_types | 45ff1d79-0dd7-4309-b259-652c5f9e3b41 |
| id | 9379f22c-a5c0-4455-bd25-ad373e93d7c3 |
| name | cg_1 |
+----------------------+--------------------------------------+
Next we’ll create two shares in the new consistency group.
$ manila create --name share_1 --consistency-group "cg_1" --share_type "type_1" NFS 1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | creating |
| description | None |
| availability_zone | nova |
| share_network_id | None |
| share_server_id | None |
| host | None |
| snapshot_id | None |
| is_public | False |
| id | 01eab865-a15b-4443-84e9-68b9c5fc3634 |
| size | 1 |
| name | None |
| share_type | type_1 |
| created_at | 2015-08-18T17:40:16.996290 |
| share_proto | NFS |
| consistency_group_id | 9379f22c-a5c0-4455-bd25-ad373e93d7c3 |
| source_cgsnapshot_member_id | None |
| project_id | f55f22cc74b347f6992a9f969eeb40a1 |
| metadata | {} |
+-----------------------------+--------------------------------------+
$ manila create --name share_2 --consistency-group "cg_1" --share_type "type_1" NFS 1
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | creating |
| description | None |
| availability_zone | nova |
| share_network_id | None |
| share_server_id | None |
| host | None |
| snapshot_id | None |
| is_public | False |
| id | f60520d9-73e4-4755-a4e7-cec027d0dbad |
| size | 1 |
| name | share_2 |
| share_type | type_1 |
| created_at | 2015-08-18T17:44:48.290880 |
| share_proto | NFS |
| consistency_group_id | 9379f22c-a5c0-4455-bd25-ad373e93d7c3 |
| source_cgsnapshot_member_id | None |
| project_id | f55f22cc74b347f6992a9f969eeb40a1 |
| metadata | {} |
+-----------------------------+--------------------------------------+
Next we’ll create two CG snapshots of the new consistency group.
$ manila cg-snapshot-create --name snapshot_1 --description 'first snapshot of cg-1' 'cg_1'
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| status | creating |
| name | snapshot_1 |
| created_at | 2015-08-18T17:49:11.441552 |
| consistency_group_id | 9379f22c-a5c0-4455-bd25-ad373e93d7c3 |
| project_id | f55f22cc74b347f6992a9f969eeb40a1 |
| id | 9fc2c246-b5dc-4cae-97b5-f136aff6abdc |
| description | first snapshot of cg-1 |
+----------------------+--------------------------------------+
$ manila cg-snapshot-list
+--------------------------------------+------------+------------------------+-----------+
| id | name | description | status |
+--------------------------------------+------------+------------------------+-----------+
| 9fc2c246-b5dc-4cae-97b5-f136aff6abdc | snapshot_1 | first snapshot of cg-1 | available |
+--------------------------------------+------------+------------------------+-----------+
$ manila cg-snapshot-show 'snapshot_1'
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| status | available |
| name | snapshot_1 |
| created_at | 2015-08-18T17:49:12.000000 |
| consistency_group_id | 9379f22c-a5c0-4455-bd25-ad373e93d7c3 |
| project_id | f55f22cc74b347f6992a9f969eeb40a1 |
| id | 9fc2c246-b5dc-4cae-97b5-f136aff6abdc |
| description | first snapshot of cg-1 |
+----------------------+--------------------------------------+
$ manila cg-snapshot-create --name snapshot_2 --description 'second snapshot of cg-1' 'cg_1'
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| status | creating |
| name | snapshot_2 |
| created_at | 2015-08-18T17:51:01.319632 |
| consistency_group_id | 9379f22c-a5c0-4455-bd25-ad373e93d7c3 |
| project_id | f55f22cc74b347f6992a9f969eeb40a1 |
| id | c671dcc5-10bf-4445-b96e-b12723ade738 |
| description | second snapshot of cg-1 |
+----------------------+--------------------------------------+
$ manila cg-snapshot-list
+--------------------------------------+------------+-------------------------+-----------+
| id | name | description | status |
+--------------------------------------+------------+-------------------------+-----------+
| 9fc2c246-b5dc-4cae-97b5-f136aff6abdc | snapshot_1 | first snapshot of cg-1 | available |
| c671dcc5-10bf-4445-b96e-b12723ade738 | snapshot_2 | second snapshot of cg-1 | available |
+--------------------------------------+------------+-------------------------+-----------+
Finally we’ll create a new CG from one of the CG snapshots we created
above.
$ manila cg-create --name cg_3 --source-cgsnapshot-id 9fc2c246-b5dc-4cae-97b5-f136aff6abdc
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| status | creating |
| description | None |
| source_cgsnapshot_id | 9fc2c246-b5dc-4cae-97b5-f136aff6abdc |
| created_at | 2015-08-18T19:26:46.419836 |
| share_network_id | None |
| share_server_id | None |
| host | ubuntu@cmode_single_svm_nfs#aggr1 |
| project_id | f55f22cc74b347f6992a9f969eeb40a1 |
| share_types | 45ff1d79-0dd7-4309-b259-652c5f9e3b41 |
| id | d4a282dc-d28d-4d51-b0b0-64766cc099c6 |
| name | cg_3 |
+----------------------+--------------------------------------+
Creating Manila Share Replicas
In this section, we’ll create and work with share replicas. First we’ll
create a share type that supports replication.
$ manila type-create replication false
+----------------------+--------------------------------------+
| Property | Value |
+----------------------+--------------------------------------+
| required_extra_specs | driver_handles_share_servers : False |
| Name | replication |
| Visibility | public |
| is_default | - |
| ID | ce1709ef-0b20-4cbf-9fc0-2b75adfee9b8 |
+----------------------+--------------------------------------+
Assign replication_type and snapshot_support attributes to the replication share-type
$ manila type-key replication set replication_type=dr snapshot_support=True
Next we’ll create a share.
$ manila create NFS 1 --share-type replication
+-----------------------------+--------------------------------------+
| Property | Value |
+-----------------------------+--------------------------------------+
| status | creating |
| share_type_name | replication |
| description | None |
| availability_zone | None |
| share_network_id | None |
| share_server_id | None |
| host | |
| access_rules_status | active |
| snapshot_id | None |
| is_public | False |
| task_state | None |
| snapshot_support | True |
| id | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc |
| size | 1 |
| name | None |
| share_type | ce1709ef-0b20-4cbf-9fc0-2b75adfee9b8 |
| has_replicas | False |
| replication_type | dr |
| created_at | 2016-03-23T18:16:22.000000 |
| share_proto | NFS |
| consistency_group_id | None |
| source_cgsnapshot_member_id | None |
| project_id | 3d1d93550b1448f094389d6b5df9659e |
| metadata | {} |
+-----------------------------+--------------------------------------+
$ manila show f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc
+----------------------------+-----------------------------------------------------------------+
| Property |Value |
+----------------------------+-----------------------------------------------------------------+
| status |available |
| share_type_name |replication |
| description |None |
| availability_zone |nova |
| share_network_id |None |
| export_locations | |
| |path = 172.20.124.230:/share_11265e8a_200c_4e0a_a40f_b7a1117001ed|
| |preferred = True |
| |is_admin_only = False |
| |id = d9634102-e859-42ab-842e-687c209067e3 |
| |share_instance_id = 11265e8a-200c-4e0a-a40f-b7a1117001ed |
| share_server_id |None |
| host |openstack2@cmodeSSVMNFS#aggr3 |
| access_rules_status |active |
| snapshot_id |None |
| is_public |False |
| task_state |None |
| snapshot_support |True |
| id |f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc |
| size |1 |
| name |None |
| share_type |ce1709ef-0b20-4cbf-9fc0-2b75adfee9b8 |
| has_replicas |False |
| replication_type |dr |
| created_at |2016-03-23T18:16:22.000000 |
| share_proto |NFS |
| consistency_group_id |None |
| source_cgsnapshot_member_id|None |
| project_id |3d1d93550b1448f094389d6b5df9659e |
| metadata |{} |
+----------------------------+-----------------------------------------------------------------+
When a share is created with a share type that has the replication_type
extra spec, it will be treated as the primary/’active’ replica. Let’s
list the replicas.
$ manila share-replica-list --share-id f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc
+--------------------------------------+-----------+---------------+--------------------------------------+------------------------------+-------------------+----------------------------+
| ID | Status | Replica State | Share ID | Host | Availability Zone | Updated At |
+--------------------------------------+-----------+---------------+--------------------------------------+------------------------------+-------------------+----------------------------+
| 11265e8a-200c-4e0a-a40f-b7a1117001ed | available | active | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS#aggr3| nova | 2016-03-23T18:16:34.000000 |
+--------------------------------------+-----------+---------------+--------------------------------------+------------------------------+-------------------+----------------------------+
Next we’ll create a replica of the share.
$ manila share-replica-create f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | creating |
| share_id | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc |
| availability_zone | None |
| created_at | 2016-03-23T18:19:13.712615 |
| updated_at | None |
| share_network_id | None |
| share_server_id | None |
| host | |
| replica_state | None |
| id | b3191744-cee9-478b-b906-c5a7a3934adb |
+-------------------+--------------------------------------+
$ manila share-replica-show b3191744-cee9-478b-b906-c5a7a3934adb
+-------------------+--------------------------------------+
| Property | Value |
+-------------------+--------------------------------------+
| status | available |
| share_id | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc |
| availability_zone | nova |
| created_at | 2016-03-23T18:19:13.000000 |
| updated_at | 2016-03-23T18:19:23.000000 |
| share_network_id | None |
| share_server_id | None |
| host | openstack2@cmodeSSVMNFS2#aggr4 |
| replica_state | out_of_sync |
| id | b3191744-cee9-478b-b906-c5a7a3934adb |
+-------------------+--------------------------------------+
Now we will list the replicas for the share. As you can see, the active
replica is located on the pool ‘openstack2@cmodeSSVMNFS#aggr3’ and the
new replica is located on ‘openstack2@cmodeSSVMNFS2#aggr4’. The new
replica has a replica state of ‘out_of_sync’, this means that the
share data has not been synchronized within the replication window,
which is one hour for the cDOT driver.
$ manila share-replica-list --share-id f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
| ID | Status | Replica State | Share ID | Host | Availability Zone | Updated At |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
| 11265e8a-200c-4e0a-a40f-b7a1117001ed | available | active | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS#aggr3 | nova | 2016-03-23T18:16:34.000000 |
| b3191744-cee9-478b-b906-c5a7a3934adb | available | out_of_sync | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS2#aggr4 | nova | 2016-03-23T18:19:23.000000 |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
Manila checks the status of a replica based on the
replica_state_update_interval configuration option. If we wait a
short while, the replica will become in sync. If the replica does not
become in-sync, refer to the section called Common Problems.
$ manila share-replica-list --share-id f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
| ID | Status | Replica State | Share ID | Host | Availability Zone | Updated At |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
| 11265e8a-200c-4e0a-a40f-b7a1117001ed | available | active | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS#aggr3 | nova | 2016-03-23T18:16:34.000000 |
| b3191744-cee9-478b-b906-c5a7a3934adb | available | in_sync | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS2#aggr4 | nova | 2016-03-23T18:27:57.000000 |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
Finally, let us failover to our other replica.
$ manila share-replica-promote b3191744-cee9-478b-b906-c5a7a3934adb
$ manila share-replica-list --share-id f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc
+--------------------------------------+--------------------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
| ID | Status | Replica State | Share ID | Host | Availability Zone | Updated At |
+--------------------------------------+--------------------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
| 11265e8a-200c-4e0a-a40f-b7a1117001ed | available | active | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS#aggr3 | nova | 2016-03-23T18:16:34.000000 |
| b3191744-cee9-478b-b906-c5a7a3934adb | replication_change | in_sync | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS2#aggr4 | nova | 2016-03-23T18:31:08.000000 |
+--------------------------------------+--------------------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
$ manila share-replica-list --share-id f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
| ID | Status | Replica State | Share ID | Host | Availability Zone | Updated At |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
| 11265e8a-200c-4e0a-a40f-b7a1117001ed | available | out_of_sync | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS#aggr3 | nova | 2016-03-23T18:31:35.000000 |
| b3191744-cee9-478b-b906-c5a7a3934adb | available | active | f49d7f1f-15e7-484a-83d9-5eb5fb6ad7fc | openstack2@cmodeSSVMNFS2#aggr4 | nova | 2016-03-23T18:31:35.000000 |
+--------------------------------------+-----------+---------------+--------------------------------------+-------------------------------------+-------------------+----------------------------+
Migrating Manila Shares
In this section, we’ll migrate a share from one pool to another.
$ manila migration-start myFlash ocata@cmode_multi_svm_nfs#manila --writable False \
--preserve-snapshots True \
--preserve-metadata True \
--nondisruptive True
We can check the migration progress by using the migration-get-progress command.
$ manila migration-get-progress myFlash
+----------------+-------------------------------+
| Property | Value |
+----------------+-------------------------------+
| task_state | migration_driver_in_progress |
| total_progress | 99 |
+----------------+-------------------------------+
Once the task state has transitioned to
migration_driver_phase1_done, we can complete the migration process
$ manila migration-complete myFlash