Deploying NetApp ONTAP Manila driver in a Red Hat OpenStack Platform 17.1

updated: 2024-10-11 11:24
Contents

Deploying NetApp ONTAP Manila driver in a Red Hat OpenStack Platform 17.1

Overview

This guide shows how to configure and deploy NetApp ONTAP Manila driver in a Red Hat OpenStack Platform (RHOSP) 17.1 Overcloud, using RHOSP Director. After reading this, you’ll be able to define the proper environment files and deploy single or multiple ONTAP Manila backends in RHOSP Overcloud Controller nodes.

Note

For more information about RHOSP, please refer to its documentation pages.

Warning

RHOSP17.1 is based on OpenStack Wallaby release. Features included after Wallaby release are not available in RHOSP17.1.

Requirements

In order to deploy NetApp Manila backends, you should have the following requirements satisfied:

  • NetApp ONTAP storage controllers deployed and ready to be used as Manila backends. See ONTAP Prerequisites for more details.

  • RHOSP Director user credentials to deploy Overcloud.

  • RHOSP Overcloud Controller nodes where Manila services will be installed.

Deployment Steps

Prepare the environment files

RHOSP makes use of TripleO Heat Templates (THT), which allows you to define the Overcloud resources by creating environment files.

Single backend configuration

To configure a single NetApp Manila backend, define an environment file as in the following example:

  • /home/stack/templates/tripleo-netapp-single-svm.yaml

      resource_registry:
    OS::TripleO::Services::ManilaApi: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-api-container-puppet.yaml
    OS::TripleO::Services::ManilaScheduler: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-scheduler-container-puppet.yaml
    OS::TripleO::Services::ManilaShare: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-share-pacemaker-puppet.yaml
    OS::TripleO::Services::ManilaBackendNetapp: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-backend-netapp.yaml

  parameter_defaults:
    ManilaNetappBackendName: 'tripleo_netapp_single_svm'
    ManilaNetappDriverHandlesShareServers: 'false'
    #Set above value to 'true' in case of DHSS=True
    ManilaNetappLogin: 'admin_username'
    ManilaNetappPassword: 'admin_password'
    ManilaNetappServerHostname: 'hostname'
    ManilaNetappTransportType: 'http'
    ManilaNetappStorageFamily: 'ontap_cluster'
    ManilaNetappServerPort: '80'
    ManilaNetappVolumeNameTemplate: 'share_%(share_id)s'
    ManilaNetappVserver: 'vserver_name'
    #Use below aggregate param incase of DHSS=True and remove above vserver param.
    #ManilaNetappRootVolumeAggr: 'aggr0'
    ControllerExtraConfig:
      manila::config::manila_config:
        tripleo_netapp_single_svm/replication_domain:
          value: 'netapp_replication_domain'
        tripleo_netapp_single_svm/backend_availability_zone:
          value: 'manila-zone-0'
        #Use below configuration options for enabling "Standalone Network Plugin" with DHSS=True
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_network_type:
          #value: flat
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_mask:
          #value: 255.255.255.0
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_ip_version:
          #value: 4
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_gateway:
          #value: *.*.*.*
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_allowed_ip_ranges:
          #value: *.*.*.*-*.*.*.*

    Modify the parameter values according to your NetApp ONTAP backend configuration.

Note

1. Each THT Configuration Parameter corresponds to a Manila Configuration Option. See Table 7.1, “Manila NetApp THT Configuration Parameters “ for a complete list of the THT Configuration Parameters and their correspondence to Manila Configuration Options.

2. For information on Standalone Network Plug-in, please refer to this https://netapp-openstack-dev.github.io/openstack-docs/wallaby/manila/configuration/manila_config_files/network_plugins/section_standalone_network_plugin.html#standalone-network-plugin

Note

There are some Manila Configuration Options that have no correspondent THT Configuration Parameter. If you need to set such options, you can define Custom Configuration Parameters. For instance, the previous example sets backend_availability_zone=manila-zone-0 for the backend tripleo_netapp_single_svm.

You can define arbitrary Custom Configurations using the following syntax:

parameter_defaults:
  ControllerExtraConfig:
    manila::config::manila_config:
      <backend_name>/<configuration_name>:
        value: <value>

See NetApp Unified Driver for ONTAP with Share Server management (Wallaby) and NetApp Unified Driver for ONTAP without Share Server management (Wallaby) for a complete list of the available Manila Configuration Options.

Warning

RHOSP17.1 is based on OpenStack Wallaby release. Features and Configuration Options included after Wallaby release are not available in RHOSP17.1.

Each THT Configuration Parameter corresponds to a Manila Configuration Option. The following table maps each THT Configuration Parameter to the corresponding Manila Configuration Option:

THT Parameter Name

Manila Configuration Option

Required/Optional

Description

ManilaNetappBackendName

share_backend_name

Required

The name used by Manila to refer to the Manila backend.

ManilaNetappLogin

netapp_login

Required

Administrative user account name used to access the storage system.

ManilaNetappDriverHandlesShareServers

driver_handles_share_servers

Required

Denotes whether the driver should handle the responsibility of managing share servers. This must be set to true if the driver is to manage share servers.

ManilaNetappPassword

netapp_password

Required

Password for the administrative user account specified in the netapp_login option.

ManilaNetappServerHostname

netapp_server_hostname

Required

The hostname or IP address for the storage system or proxy server. The value of this option should be the IP address of the cluster management LIF.

ManilaNetappTransportType

netapp_transport_type

Required

Transport protocol for communicating with the storage system or proxy server. Valid options include http and https.

ManilaNetappStorageFamily

netapp_storage_family

Required

The storage family type used on the storage system; valid values are ontap_cluster for ONTAP.

ManilaNetappServerPort

netapp_server_port

Optional

The TCP port to use for communication with the storage system or proxy server. If not specified, ONTAP drivers will use 80 for HTTP and 443 for HTTPS.

ManilaNetappVolumeNameTemplate

netapp_volume_name_template

Optional

This option specifies a string replacement template that is applied when naming FlexVol volumes that are created as a result of provisioning requests.

ManilaNetappVserver

netapp_vserver

Required

This option specifies the storage virtual machine (previously called a Vserver) name on the storage cluster on which provisioning of shared file systems should occur. This parameter is required if the driver is to operate without managing share servers (that is, be limited to the scope of a single SVM).

ManilaNetappVserverNameTemplate

netapp_vserver_name_template

Optional

This option specifies a string replacement template that is applied when naming FlexVol volumes that are created as a result of provisioning requests.

ManilaNetappLifNameTemplate

netapp_lif_name_template

Optional

This option specifies a string replacement template that is applied when naming data LIFs that are created as a result of provisioning requests.

ManilaNetappAggrNameSearchPattern

netapp_aggregate_name_search_pattern

Optional

This option specifies a regular expression that is applied against all available aggregates. This filtered list will be reported to the Manila scheduler as valid pools for provisioning new shares.

ManilaNetappRootVolumeAggr

netapp_root_volume_aggregate

Required

This option specifies name of the aggregate upon which the root volume should be placed when a new SVM is created to correspond to a Manila share server.

ManilaNetappRootVolume

netapp_root_volume

Optional

This option specifies name of the root volume that will be created when a new SVM is created to correspond to a Manila share server.

ManilaNetappPortNameSearchPattern

netapp_port_name_search_pattern

Optional

This option allows you to specify a regular expression for overriding the selection of network ports on which to create Vserver LIFs.

ManilaNetappTraceFlags

netapp_trace_flags

Optional

This option is a comma-separated list of options (valid values include method and api) that controls which trace info is written to the Manila logs when the debug level is set to True.

ManilaNetappEnabledShareProtocols

netapp_enabled_share_protocols

Optional

This option specifies the NFS protocol versions that will be enabled on new SVMs created by the driver. Valid values include nfs3, nfs4.0, nfs4.1.

ManilaNetappVolumeSnapshotReservePercent

netapp_volume_snapshot_reserve_percent

Optional

This option specifies the percentage of share space set aside as reserve for snapshot usage. Valid values range from 0 to 90.

ManilaNetappSnapmirrorQuiesceTimeout

netapp_snapmirror_quiesce_timeout

Optional

The maximum time in seconds to wait for existing snapmirror transfers to complete before aborting when promoting a replica.

ManilaNetappVolumeSnapshotReservePercent

netapp_volume_snapshot_reserve_percent

Optional

The percentage of share space set aside as reserve for snapshot usage; valid values range from 0 to 90.

Table 7.1. Manila NetApp THT Configuration Parameters

Multiple backend configuration

THT has no templates for configuring multiple NetApp Manila backends. In order to configure multiple NetApp Manila backends, you need to define the first backend with THT, and the additional backends with Custom Configurations.

It’s possible to define all the backends in a single environment file, but for sake of clarity, the following example organizes the backends in multiple smaller environment files:

  • /home/stack/templates/tripleo-netapp-multi-svm-1.yaml

    This file defines the first Manila share backend tripleo_netapp_multi_svm_1 and its parameters. The definition of the first backend is the same for both single and multiple backend configuration:

      resource_registry:
    OS::TripleO::Services::ManilaBackendNetapp: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-backend-netapp.yaml
    OS::TripleO::Services::ManilaApi: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-api-container-puppet.yaml
    OS::TripleO::Services::ManilaScheduler: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-scheduler-container-puppet.yaml
    OS::TripleO::Services::ManilaShare: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-share-pacemaker-puppet.yaml
    OS::TripleO::Services::ManilaBackendNetapp: /usr/share/openstack-tripleo-heat-templates/deployment/manila/manila-backend-netapp.yaml

  parameter_defaults:
    ManilaNetappBackendName: 'tripleo_netapp_multi_svm_1'
    ManilaNetappDriverHandlesShareServers: 'false'
    #Set above value to 'true' in case of DHSS=True
    ManilaNetappLogin: 'admin_username'
    ManilaNetappPassword: 'admin_password'
    ManilaNetappServerHostname: 'hostname'
    ManilaNetappTransportType: 'http'
    ManilaNetappStorageFamily: 'ontap_cluster'
    ManilaNetappServerPort: '80'
    ManilaNetappVolumeNameTemplate: 'share_%(share_id)s'
    ManilaNetappVserver: 'vserver_name'
    #Use below aggregate param incase of DHSS=True and remove above vserver param.
    #tripleo_netapp_multi_svm_2/netapp_root_volume_aggregate:
      #value: 'aggr0'
    ControllerExtraConfig:
      manila::config::manila_config:
        tripleo_netapp_multi_svm_1/replication_domain:
          value: 'netapp_replication_domain'
        tripleo_netapp_multi_svm_1/backend_availability_zone:
          value: 'manila-zone-0'
        #Use below configuration options for enabling "Standalone Network Plugin" with DHSS=True
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_network_type:
          #value: flat
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_mask:
          #value: 255.255.255.0
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_ip_version:
          #value: 4
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_gateway:
          #value: *.*.*.*
        #tripleo_netapp_cifs_ss_1/standalone_network_plugin_allowed_ip_ranges:
          #value: *.*.*.*-*.*.*.*

    Modify the parameter values according to your NetApp ONTAP backend configuration.

  • /home/stack/templates/manila-enabled-backends.yaml

    This file defines which additional backends will be enabled. In this example, one additional backend tripleo_netapp_multi_svm_2 will be enabled:

       parameter_defaults:
     ControllerExtraConfig:
       manila_user_enabled_backends:
         - 'tripleo_netapp_multi_svm_2'

  • /home/stack/templates/tripleo-netapp-multi-svm-2.yaml

    This file defines the second Manila share backend tripleo_netapp_multi_svm_2 and its parameters:

      parameter_defaults:
    ControllerExtraConfig:
      manila::config::manila_config:
        tripleo_netapp_multi_svm_2/share_backend_name:
          value: 'tripleo_netapp_multi_svm_2'
        tripleo_netapp_multi_svm_2/share_driver:
          value: 'manila.share.drivers.netapp.common.NetAppDriver'
        tripleo_netapp_multi_svm_2/driver_handles_share_servers:
          value: 'false'
        #Set above value to 'true' in case of DHSS=True
        tripleo_netapp_multi_svm_2/netapp_login:
          value: 'admin_username'
        tripleo_netapp_multi_svm_2/netapp_password:
          value: 'admin_password'
        tripleo_netapp_multi_svm_2/netapp_server_hostname:
          value: 'hostname'
        tripleo_netapp_multi_svm_2/netapp_storage_family:
          value: 'ontap_cluster'
        tripleo_netapp_multi_svm_2/netapp_transport_type:
          value: 'http'
        tripleo_netapp_multi_svm_2/netapp_server_port:
          value: '80'
        tripleo_netapp_multi_svm_2/netapp_vserver:
          value: <vserver_name>
        #Use below aggregate params incase of DHSS=True and remove above vserver param.
        #tripleo_netapp_multi_svm_2/netapp_aggregate:
          #value: <aggr_name>
        tripleo_netapp_multi_svm_2/replication_domain:
          value: 'netapp_replication_domain'
        tripleo_netapp_multi_svm_2/backend_availability_zone:
          value: 'manila-zone-0'
        #Use all below lines incase of CIFS DHSS=True
        #tripleo_netapp_cifs_ss_2/standalone_network_plugin_network_type:
          #value: flat
        #tripleo_netapp_cifs_ss_2/standalone_network_plugin_mask:
          #value: 255.255.255.0
        #tripleo_netapp_cifs_ss_2/standalone_network_plugin_ip_version:
          #value: 4
        #tripleo_netapp_cifs_ss_2/standalone_network_plugin_gateway:
          #value: *.*.*.*
        #tripleo_netapp_cifs_ss_2/standalone_network_plugin_allowed_ip_ranges:
          #value: *.*.*.*-*.*.*.*

    Modify the parameter values according to your NetApp ONTAP backend configuration.

Note

[Applicable only incase of DHSS=False] Starting from ONTAP 9.13.1, there is a design change on deleting flexclone volumes. ONTAP 9.13.1 has introduced volume retention option by default. It means that, the flexclone volumes (equivalent to “shares created from snapshot” in OpenStack) which are deleted in OpenStack would be retained in ONTAP by default, and that will cause share deletion problems in Manila. i.e Manila will not be able to delete such shares, as the equivalent flexclone volumes would be still linked in “volume clones” of parent volume in ONTAP. To avoid waiting for the retention period,and to delete the flexclone share immediately in OpenStack or ONTAP, user can can set the retention period to 0 for the share server being used here.

> set diagnostic

> vserver modify -vserver <vserver_name> -volume-delete-retention-hours 0

Deploy Overcloud

Now that you have the Manila backend environment files defined, you can run the command to deploy RHOSP Overcloud. Run the following command as stack user in the RHOSP Director command line, specifying the YAML file(s) you defined: To deploy single backend,

 (undercloud) [stack@rhosp171-undercloud ~]$ openstack overcloud deploy \
 --templates \
 -e /home/stack/containers-prepare-parameter.yaml \
 -e /home/stack/templates/tripleo-netapp-single-svm.yaml \
 ...
 --stack overcloud

Alternatively for single/multiple backend deployment, you can use --environment-directory parameter and specify the whole directory to the deployment command. It will consider all the YAML files within this directory:

 (undercloud) [stack@rhosp171-undercloud ~]$ openstack overcloud deploy \
 --templates \
 -e /home/stack/containers-prepare-parameter.yaml \
 --environment-directory /home/stack/templates \
 --stack overcloud

Note

By default, Manila is deployed with both NFS and CIFS protocols enabled.

After RHOSP Overcloud is deployed, run the following command to check if the Manila services are up:

[stack@rhosp171-undercloud ~]$ source ~/overcloudrc
(overcloud) [stack@rhosp171-undercloud ~]$ manila service-list

Create Default Share Type

RHOSP17.1 Director sets Manila Configuration Option default_share_type to default, but does not create the actual share type. Run the following command as stack user in the RHOSP Director command line to create the default share type:

[stack@rhosp171-undercloud ~]$ source ~/overcloudrc
(overcloud) [stack@rhosp171-undercloud ~]$ manila type-create default false
#Replace ``false`` to ``true`` in the above command for DHSS=True backends.
#Setting up snapshot-related extra-specs as these features are disabled by default.
(overcloud) [stack@rhosp171-undercloud ~]$ manila type-key default set snapshot_support=True create_share_from_snapshot_support=True revert_to_snapshot_support=True

Note

For more netapp specific extra-specs, please refer below link.

https://netapp-openstack-dev.github.io/openstack-docs/wallaby/manila/deployment_choice/section_creating_service_catalog.html

updated: 2024-10-11 11:24

This document is licensed under Apache 2.0 license.

found an error? report a bug questions?