NetApp Unified Driver for ONTAP with Fibre Channel

updated: 2024-10-11 11:24

NetApp Unified Driver for ONTAP with Fibre Channel¶

The NetApp unified driver for ONTAP with Fibre Channel is a driver interface from OpenStack Cinder to NetApp ONTAP storage controllers to accomplish provisioning and management of a storage-area network (SAN) block storage entity; that is, a NetApp LUN that uses the Fibre Channel protocol.

To set up the NetApp ONTAP Fibre Channel driver for Cinder, the following stanza should be added to the Cinder configuration file (cinder.conf):

[myFCBackend]
volume_backend_name=myFCBackend
volume_driver=cinder.volume.drivers.netapp.common.NetAppDriver
netapp_server_hostname=hostname
netapp_server_port=80
netapp_storage_protocol=fc
netapp_storage_family=ontap_cluster
netapp_login=admin_username
netapp_password=admin_password
netapp_vserver=svm_name
max_over_subscription_ratio=1.0
reserved_percentage=5

Be sure that the value of the enabled_backends option in the [DEFAULT] stanza includes the name of the stanza you chose for the backend.
The value of netapp_storage_protocol MUST be set to fc

Table 4.22, “Configuration options for ONTAP with Fibre Channel” below lists the configuration options available for the unified driver for an ONTAP deployment that uses the Fibre Channel storage protocol.

Option	Type	Default Value	Description
`netapp_server_hostname`	Required		The hostname or IP address for the storage system or proxy server. The value of this option should be the IP address of either the cluster management LIF or the SVM management LIF.
`netapp_server_port`	Optional		The TCP port to use for communication with the storage system or proxy server. If not specified, ONTAP drivers will use 80 for HTTP and 443 for HTTPS.
`netapp_login`	Required		Administrative user account name used to access the storage system or proxy server.
`netapp_password`	Required		Password for the administrative user account specified in the `netapp_login` option.
`netapp_storage_protocol`	Required		The storage protocol to be used. Valid options are `nfs`, `iscsi`, `nvme` or `fc`.
`netapp_transport_type`	Required	`http`	Transport protocol for communicating with the storage system or proxy server. Valid options include `http` and `https`.
`netapp_size_multiplier`	Optional	`1.2`	When creating volumes, the quantity to be multiplied to the requested OpenStack volume size to ensure enough space is available on the SVM (aka Vserver). This value is currently only used when iSCSI has been selected as the storage protocol to be used.
`netapp_vserver`	Required		This option specifies the storage virtual machine (previously called a Vserver) name on the storage cluster on which provisioning of block storage volumes should occur.
`netapp_storage_family`	Optional	`ontap_cluster`	The storage family type used on the storage system; valid values are `ontap_cluster` for ONTAP systems.
`netapp_pool_name_search_pattern`	Optional	`(.+)`	This option is only utilized when the Cinder driver is configured to use iSCSI, NVMe or Fibre Channel. It is used to restrict provisioning to the specified FlexVol volumes. Specify the value of this option as a regular expression which will be applied to the names of FlexVol volumes from the storage backend which represent pools in Cinder. `^` (beginning of string) and `$` (end of string) are implicitly wrapped around the regular expression specified before filtering.
`netapp_lun_space_reservation`	Optional	`enabled`	This option specifies whether space will be reserved when creating Cinder volumes on NetApp backends using the iSCSI or FC storage protocols. If this option is set to `enabled`, LUNs created during volume creation or volume cloning workflows will always be thick provisioned. If this option is set to `disabled`, LUNs created during volume creation or volume cloning workflows will always be thin provisioned. Note that this option does not affect the implementation of Cinder snapshots, where the LUN clone that represents the snapshot will always be thin provisioned. Valid options are `enabled` and `disabled`.
`reserved_percentage`	Optional	`0`	This option represents the amount of total capacity of a storage pool that will be reserved and cannot be utilized for provisioning Cinder volumes.
`max_over_subscription_ratio`	Optional	`20.0`	This option is defined as a float, and specifies the amount of over-provisioning to allow when thin provisioning is being used in the storage pool. A value of 1.0 will mean that the provisioned capacity will not be able to exceed the total capacity, while larger values will result in increased levels of allowed over-provisioning.
`filter_function`	Optional	(see description)	This option may be used to override the default filter function, which prevents Cinder from placing new volumes on storage controllers that may become overutilized. The default value is “capabilities.utilization < 70”.
`goodness_function`	Optional	(see description)	This option may be used to override the default goodness function, which allows Cinder to place new volumes on lesser-utilized storage controllers. The default value is “100 - capabilities.utilization”.
`trace_flags`	Optional		This option is a comma-separated list of options (valid values include `method` and `api`) that controls which trace info is written to the Cinder logs when the debug level is set to `True`.
`netapp_api_trace_pattern`	Optional	`(.+)`	A regular expression to limit the API tracing. This option is honored only if enabling `api` tracing with the `trace_flags` option. By default, all APIs will be traced.
`netapp_migrate_volume_timeout`	Optional	`3600`	This option sets time in seconds to wait for a volume Storage Assisted Migration to complete. It’s minimum value is 30 seconds.
`netapp_use_legacy_client`	Optional	`True`	Select which ONTAP client to use for retrieving and modifying data on the storage. The legacy client relies on ZAPI calls. If set to `False`, the new REST client is used, which runs REST calls if supported, otherwise falls back to the equivalent ZAPI call.
`netapp_async_rest_timeout`	Optional	`60`	The maximum time in seconds to wait for completing a REST asynchronous operation.
`netapp_ssl_cert_path`	Optional	(see description)	The path to a CA_BUNDLE file or directory with certificates of trusted CA. If set to a directory, it must have been processed using the `c_rehash` utility supplied with OpenSSL. If not informed, it will use the Mozilla’s carefully curated collection of Root Certificates for validating the trustworthiness of SSL certificates. Only applies when enabling the REST client.

Table 4.22. Configuration options for ONTAP with Fibre Channel

Important

The option netapp_use_legacy_client can only be set to False (storage communication through REST API) when using ONTAP storage 9.11.1 or newer.

Caution

If you specify an account in the netapp_login option that only has SVM administration privileges (rather than cluster administration privileges), some advanced features of the NetApp unified driver will not work and you may see warnings in the Cinder logs. See the section called “Account Permission Considerations” for more details on the required access level permissions for an SVM admin account.

Important

In order for Fibre Channel to be set up correctly, you also need to set up Fibre Channel zoning for your backends. See the section called “Fibre Channel & cinder.conf” for more details on configuring Fibre Channel zoning.

updated: 2024-10-11 11:24

This document is licensed under Apache 2.0 license.